Color of the status bar window in screen
.Ar x .
.It Ic bar_delay
-Update frequency, in seconds, of external script that populates the status bar.
+Update frequency, in seconds, of external script that populates the status
+bar.
.It Ic bar_enabled
Enable or disable status bar.
.It Ic bar_font
-Font used in the status bar. Either Xft or X Logical Font Description (XLFD) may be used
-to specify the font.
-.Pp
-Example for Xft:
+Font used in the status bar. Either Xft or X Logical Font Description (XLFD)
+may be used to specify fonts. Fallback fonts may be specified by separating
+each font with a comma. If all entries are XLFD syntax, font set will be
+used. If at least one entry is Xft, Xft will be used. Note that if Xft is in
+use, only the first font that successfully loads will be used regardless of
+missing glyphs. The default is to use font set. Also note that dmenu does
+not support Xft fonts.
+.Pp
+Xft examples:
.Bd -literal -offset indent
bar_font = Terminus:style=Regular:pixelsize=14:antialias=true
+
+bar_font = -*-profont-medium-*-*-*-11-*-*-*-*-*-*-*,Terminus:pixelsize=14,\
+-*-clean-medium-*-*-*-12-*-*-*-*-*-*-*
.Ed
.Pp
-Example for XLFD:
+Font set examples:
.Bd -literal -offset indent
bar_font = -*-terminus-medium-*-*-*-14-*-*-*-*-*-*-*
+
+bar_font = -*-profont-medium-*-*-*-11-*-*-*-*-*-*-*,\
+-*-terminus-medium-*-*-*-14-*-*-*-*-*-*-*,\
+-*-clean-medium-*-*-*-12-*-*-*-*-*-*-*
.Ed
.Pp
To list the available fonts in your system see
.It Li "++" Ta "A literal" Ql +
.El
.Pp
-All character sequences may limit its output to a specific length, for example
-+64A.
-Any characters that don't match the specification are copied as-is.
+All character sequences may limit its output to a specific length, for
+example +64A. Any characters that don't match the specification are copied
+as-is.
.It Ic bar_justify
Justify the status bar text. Possible values are
.Pa left ,
This ratio is the screen size to what they will be resized.
For example, 0.6 is 60% of the physical screen size.
.It Ic disable_border
-Remove border when bar is disabled and there is only one window on the screen.
+Remove border when bar is disabled and there is only one window on the
+screen.
.It Ic focus_close
Window to put focus when the focused window is closed.
Possible values are
.Pa previous
are relative to the window that is closed.
.It Ic focus_close_wrap
-Whether to allow the focus to jump to the last window when the first window is
-closed or vice versa.
-Disable by setting to 0.
+Whether to allow the focus to jump to the last window when the first window
+is closed or vice versa. Disable by setting to 0.
.It Ic focus_default
-Window to put focus when no window has been focused.
-Possible values are
+Window to put focus when no window has been focused. Possible values are
.Pa first
and
.Pa last
(default).
.It Ic focus_mode
-Using a value of
-.Pa follow_cursor
-will make the window manager focus the window
-under the mouse when switching workspaces and creating windows.
+Window focus behavior with respect to the mouse cursor. Possible values:
+.Pp
+.Bl -tag -width "follow_cursor" -offset indent -compact
+.It Cm default
+Set window focus on border crossings caused by cursor motion and
+window interaction.
+.It Cm follow_cursor
+Set window focus on all cursor border crossings, including workspace switches
+and changes to layout.
+.It Cm manual
+Set window focus on window interaction only.
+.El
.It Ic keyboard_mapping
Clear all key bindings and load new key bindings from the specified file.
This allows you to load pre-defined key bindings for your keyboard layout.
section below for a list of keyboard mapping files that have been provided
for several keyboard layouts.
.It Ic layout
-Select layout to use at start-of-day.
-Defined in the format
+Select layout to use at start-of-day. Defined in the format
ws[idx]:master_grow:master_add:stack_inc:layout:always_raise:stack_mode, e.g.
ws[2]:-4:0:1:0:horizontal sets worskspace 2 to the horizontal stack mode and
shrinks the master area by 4 ticks and adds one window to the stack, while
and
.Pa always_raise
for more information.
-Note that the stacking options are complicated and have side-effects.
-One should familiarize oneself with these commands before experimenting with the
+Note that the stacking options are complicated and have side-effects. One
+should familiarize oneself with these commands before experimenting with the
.Pa layout
option.
.Pp
.Sx QUIRKS
section below.
.It Ic region
-Allocates a custom region, removing any autodetected regions which occupy the same
-space on the screen.
+Allocates a custom region, removing any autodetected regions which occupy the
+same space on the screen.
Defined in the format screen[<idx>]:WIDTHxHEIGHT+X+Y,
e.g.\& screen[1]:800x1200+0+0.
.Pp
.Pa previous
are relative to the focused window.
.It Ic stack_enabled
-Enable or disable displaying the current stacking algorithm in the status bar.
+Enable or disable displaying the current stacking algorithm in the status
+bar.
.It Ic term_width
Set a preferred minimum width for the terminal.
If this value is greater than 0,
to
.Pa .Xdefaults .
.It Ic verbose_layout
-Enable or disable displaying the current master and stack values in the status
-bar.
-Enable by setting to 1.
+Enable or disable displaying the current master and stack values in the
+status bar. Enable by setting to 1.
.It Ic window_name_enabled
Enable or disable displaying the window name in the status bar.
Enable by setting to 1.
.Ic bar_format
option for more details.
.It Ic workspace_limit
-Set the total number of workspaces available. Minimum is 1, maximum is 22, default is 10.
+Set the total number of workspaces available. Minimum is 1, maximum is 22,
+default is 10.
.El
.Sh PROGRAMS
.Nm
-allows you to define custom actions to launch programs of your choice and then
-bind them the same as with built-in actions.
+allows you to define custom actions to launch programs of your choice and
+then bind them the same as with built-in actions.
See the
.Sx BINDINGS
section below.
.It Cm initscr
initscreen.sh
.It Cm menu
-dmenu_run \-fn $bar_font \-nb $bar_color \-nf $bar_font_color \-sb $bar_border \-sf $bar_color
+dmenu_run \-fn $bar_font \-nb $bar_color \-nf $bar_font_color \-sb
+$bar_border \-sf $bar_color
.El
.Pp
Custom programs in the configuration file are specified as follows:
.Pp
The default quirks are described below:
.Pp
-.Bl -tag -width "OpenOffice.org N.M:VCLSalFrame<TAB>XXX" -offset indent -compact
+.Bl -tag -width "OpenOffice.org N.M:VCLSalFrame<TAB>XXX" -offset indent \
+-compact
.It Firefox\-bin:firefox\-bin
TRANSSZ
.It Firefox:Dialog
.It FULLSCREEN
Remove border to allow window to use full screen size.
.It FOCUSPREV
-On exit force focus on previously focused application not previous application
-in the stack.
+On exit force focus on previously focused application not previous
+application in the stack.
.El
.Pp
Custom quirks in the configuration file are specified as follows:
.Nm
was written by:
.Pp
-.Bl -tag -width "Ryan Thomas McBride Aq mcbride@countersiege.com " -offset indent -compact
+.Bl -tag -width "Ryan Thomas McBride Aq mcbride@countersiege.com " -offset \
+indent -compact
.It Cm Marco Peereboom Aq marco@peereboom.us
.It Cm Ryan Thomas McBride Aq mcbride@countersiege.com
.It Cm Darrin Chandler Aq dwchandler@stilyagin.com